Capabilities · Automate
Automation & IntegrationThe whole plant, on one screen.
Instrumentation, PLC, SCADA and HMI, with online monitoring and remote control, so the plant can be seen and run from anywhere.
- 01Instrument
- 02Control
- 03Visualise
- 04Report
The challenge
Why it matters.
A plant nobody can see is a plant that drifts: a pump trips at night, a parameter creeps past the limit, and nobody knows until the next manual check.
Automation puts the plant on one screen. Online monitoring streams the data your regulator expects, and alarms reach your phone.
What Zeal offers
In scope.
What is included depends on the agreed contract. Detailed drawings, BOQs, lab tests, trial runs and reports are part of a project only where its scope says so.
PLC / SCADA / HMI
Control, visualisation and automation for treatment plants and their equipment.
OEMS connectivity
Online effluent monitoring analysers connected, with data ready for reporting.
Remote monitoring & control
Pumps, blowers and tank levels visible and controllable from anywhere, through RMCS.
Alarms and reports
Alarms on your phone and compliance reports from the recorded data.
How it runs
Stage by stage.
Instrument
Sensors and analysers on the process.
Control
PLC logic and panels.
Visualise
SCADA / HMI screens and dashboards.
Report
Alarms, trends and compliance data.
The full process
Design. Build. Automate. Maintain.
- 01 / Design
Survey, treatability and process design
We start on your site: flow and quality study, process selection and a design sized to the discharge norm you must meet.
- 02 / Build
Manufacture, install and commission
Equipment is supplied, installed and integrated on site, then tested until the plant performs to specification.
- 03 / Automate
Control, monitoring and compliance data
PLC and SCADA put the whole plant on one screen, and online monitoring streams the data your regulator expects.
- 04 / Maintain
Operation, maintenance and upgrades
Our O&M and AMC teams keep the plant running efficiently and compliant, and upgrade it as your needs change.
Questions
Asked before every project.
Can you automate a plant that is already running?
Yes. Instruments, controls and monitoring can be added to an existing plant, including one built by someone else.
Is monitoring part of every plant?
No. Every Zeal plant can ship with our monitoring and control software, but it is included only where the project scope says so.
Related solutions
Where this applies.
- Automation
PLC, SCADA & HMI Automation
Control panels, PLCs and SCADA that put every pump, blower and valve on one screen.
- DigitalTank levelsDemo dataEqualisationAerationTreatedBlower B-1Running
Remote Monitoring & Control Systems
Watch and control pumping stations and plants from a phone or PC, with alarms the moment something changes.
- DigitalBOD at outlet, mg/LDemo dataLimit 10Now: 8.6 mg/LWithin norms
Online Water & Effluent Quality Monitoring
Continuous analysers on your outlet, with live data sent to the pollution control board and your dashboard.
Tell us about your site.
Share your site, flow and timeline. An engineer will review your requirement and call you back.